메뉴 건너 뛰기

home   >   Product–Energy Management System   >   Wired-wireless Multi-tab

Wired-wireless Multi-tab

With the function of standby power cut-off
and electric power-saving

Wired-wireless Multi-tab

Major Certification

Excellent Product Certificate
By Small and Medium Business Administration

Intelligent Standby
Electric Power Automatic Cut-Off

It is possible to do sub-electric power supply automatic control through
the checking of main electric power supply and also possible to control
and save the electric power of peripheral devices interworking
with the screen saver through PC connection

Real-time Visualization of Electricity Matters

Through the use of energy management device which identifies access-users’ situation, it is possible to monitor ‘Consumption’ and ‘Consuming Pattern’ by measuring an individual’s electric power consumption in real-time.

6LoWPAN-based
Wireless Communications

Through the application of 6LoWPAN wireless communications technology,
this system provides the security of H/W & S/W used through the internet,
and helps users to interwork with the existing system safely and simply,
and to realize energy reduction by accessing the VuLow energy manager.

VuLow Tab Structure

Name of each part of the VuLow Tab
Explanation of LED Motion
Specifications
Motions by Marking LED Condition Motion Remark
All are turn off No Electric Power Supply
All are turned on Electric Power is supplied to all sockets Smart Electric Power-Saving
Only Green is on Electric Power is supplied to main socket Smart Electric Power-Saving
Only Red is on Electric Power is supplied to all sockets General Mode
Basic Use Method
Specifications
Function How To Use
Turning on the Electric Power Main Switch is on when it is placed at ‘on’ /’reset’
When the light is on, LED is on after turning on the main switch lamp as follows(when the light is changed to a general mode, final completion is done with red LED
Mode Change Press the reset button for more than 5 seconds
PC Communication Connect USB cable to USB-HID terminal and the computer
External Rest Switch Connect the switch to the external ‘reset’ switch terminal
Smart Electric Power-saving Mode

Smart electric power-saving mode cuts off the electric power of the auxiliary electric power socket when the device connected to main electric power socket runs in less than 100mA (22W).

  1. Connect the main devices of the computer to main electric power socket
  2. It assists the auxiliary devices such as monitor and speaker, etc.
  3. Check if the VuLow Tab is in a smart electric power-saving mode
When the computer use is ended after setting up like the above, the electric power of the auxiliary socket (monitor, speaker, etc.) is automatically cut off.

Smart electric power-saving mode is applied to the environment where peripheral devices are not used during the mixed use of main devices and peripheral devices.

Example 1) Main Devices: TV, Peripheral Devices: Speaker, DVD Player     Example 2)Main Devices: Computer, Peripheral Devices: Monitor, Speaker Printer

General Mode

When the VuLow Tab is set as general mode, the electric power is converted to a general mode, in which the electric power is constantly supplied to all five power sockets as red LED is ‘on’ alone. In a general mode, unlike smart electric power-saving mode, standby electric power cut-off is not achieved, and it is available to use the general 5-socket multi-tab in the same way.

System Diagram

Specifications

Specifications
Wired Type Rated Voltage : 250V, 10A
MCU : ATmega8
Stereo Jack Double Pole Switching
HID/USB Protocol(3Relays)
Wireless Type Rated Voltage : 250V, 10A
MCU : STM32W
IEEE 802.15.4 transceiver(radio)
Double Pole Switching(3 Relays)
CS5480 Precise Power Sensor
IPv4, IPv6 Socket Interface
Dimension 365W x 52H x 45D mm
Certification KC, emark, EPC